Larry SeftonFeb 25Must See on YouTube - Richard RaffanA big THANK YOU to Jeff Brann. Jeff called and asked if I had seen Richard Raffan's new YouTube video. I said no. Jeff then suggested I...
Larry SeftonDec 8, 2021Tip for New Vacuum Chuck UsersHere is an Oak bowl being finished on the inside. In the photo you can see that this is a large, deep, heavy bowl with a concave bottom...
Larry SeftonNov 4, 2021EVA Foam Is My Friend I use DIY vacuum chucks and am always on the lookout for gasket material. This week I was at Hobby Lobby browsing (killing time while my...
Joseph VodaOct 21, 2021Save Your Eyes And Your Sanity!A few weeks ago while visiting Larry Sefton in his shop, a bit of color caught my eye. I noticed that he had added colored rings to the...
Larry SeftonOct 21, 2021How do you paint the inside of your hollow forms?I was asked the other day how I paint the inside of my hollow forms. Over the past years I have tried a lot of methods and most did not...
Larry SeftonJul 5, 2021Bowl Drying with Moisture Absorbing Silica Gel - Spoiler Alert - IT WORKSI read on the internet someplace a while back, that a green wood woodturning can be dried using moisture adsorbing silica gel. So I...
Larry SeftonJul 2, 2021Twice turned bowls in half the time…Internet image shown above - similar to Bob's set up From Bob Wolfe - The following is an article I wrote for our blog. I do not profess...
Larry SeftonMar 24, 2021No More Metal Splinters from MagnetsThe other day Bob Wolfe was in my workshop and commented that he gets metal flakes/splinters from neodymium rare earth magnets used...